Cisco 2650 - 2650 Router Specifications download pdf (Page 51)

3-9

Cisco IOS Telephony Service, Version 2.02

Chapter 3 Additional Configuration Tasks

Information About Additional Configuration Tasks

DETAILED STEPS

Configuring On-Hold Call Notification

This service adds an audible alert option as a reminder to the IP phone user that a call is waiting on-hold.

SUMMARY STEPS

1. ephone-dn dn-tag

2. number number

3. name name

4. hold-alert timeout {idle | originator | shared}

DETAILED STEPS

Command Purpose

Step 1

Router(config)# ephone tag

Enters ephone configuration mode to register

Cisco IP phones. The maximum number of

Cisco IP phones is platform dependent. For details,

see the “Memory Requirements” section on page 1-4.

Step 2

Router(config-ephone)# speed-dial button-number

directory-number

Sets speed-dial buttons on a Cisco IP phone.

Note Although 20 speed-dials can be configured on

the Cisco IP phone, ATA phones support only

9 speed-dials with Cisco IOS Telephony

Service: *1, *2, *3, *4, *5, *6, *7, *8, and *9.

Command Purpose

Step 1

Router(config)# ephone-dn dn-tag

Enters ephone-dn configuration mode and configures the

directory numbers for the Cisco IP phone lines. The

maximum directory number is platform dependent. For

details, see the “Memory Requirements” section on

page 1-4.

Step 2

Router(config-ephone-dn)# number number

Configures a valid directory number for the Cisco IP phone

that receives on-hold call notification.

1 ... 50 51 52 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 51