Cisco 2650 - 2650 Router Specifications download pdf (Page 115)

5-15

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

call-forward noan (ephone-dn)

To configure call forwarding to another number when no answer is received from a Cisco IP phone, use

the call-forward noan command in ephone-dn configuration mode. To disable call forwarding, use the

no form of this command.

call-forward noan directory-number timeout seconds

no call-forward noan [directory-number]

Syntax Description

Defaults No default behavior or values.

Command Modes Ephone-dn configuration

Command History

Usage Guidelines The call-forwarding feature is applied to the individual telephone line associated with a directory

number and cannot be configured for all the directory numbers of the Cisco IP phone. The call-forward

noan command enables call forwarding to another number when no answer is received from a

Cisco IP phone. The timeout keyword sets the waiting time before the call is forwarded to another

phone. The time is set in seconds. The range is 3 to 60000 seconds. Using the directory number attribute

is optional, when using the no form of this command.

directory-number Selected directory number. Represents a fully qualified E.164 number.

timeout Ringing no answer timeout duration. It is the waiting time before the call is

forwarded to another phone. The time is set in seconds.

seconds Time set for the call forwarding to start. The range is 3 to 60000 seconds.

Note It is mandatory to specify and enter a timeout number in seconds,

otherwise an error message "incomplete command" will appear on

the console.

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and

Cisco 1751 multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.

1 ... 114 115 116 ... 266

No comments

Cisco 2650 - 2650 Router Specifications Page 115