-119
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
ethernet cfm mep crosscheck
ethernet cfm mep crosscheck
To enable cross-checking between the list of configured remote maintenance endpoints (MEPs) of a
domain and MEPs learned through continuity check messages (CCMs), use the ethernet cfm mep
crosscheck command in privileged EXEC mode. To disable cross-checking, use the ethernet cfm mep
crosscheck disable command.
CFM IEEE 802.1ag Standard (CFM IEEE)
ethernet cfm mep crosscheck {enable | disable} domain domain-name {port | vlan{vlan-id |
vlan-id-vlan-id | ,vlan-id-vlan-id}}
Syntax Description
Command Modes Privileged EXEC (#)
Command History
enable Indicates that cross-checking will occur.
disable Indicates that cross-checking will not occur.
vlan Indicates a VLAN for cross-checking.
vlan-id Integer from 1 to 4094 that identifies the VLAN.
any Indicates all VLANs are to be configured.
• This option is supported only in CFM D1.
vlan-id-vlan-id Integer values from 1 to 4094. The hyphen is required to separate starting
and ending VLAN ID values that are used to define a range of IDs.
,vlan-id-vlan-id (Optional) Integer values from 1 to 4094. The comma must be entered to
separate VLAN ID ranges. The hyphen is required to separate starting and
ending VLAN ID values that are used to define each range of IDs.
domain Specifies a maintenance domain.
domain-name String of a maximum of 154 characters that identifies the
maintenance domain.
port Specifies a DOWN service direction with no VLAN associations (untagged).
Release Modification
12.2(33)SRA This command was introduced.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)SRD The evc keyword and evc-name argument were added on the Cisco 7600
Series Route Switch Processor 720 (RSP 720) and the Cisco 7600 Series
Supervisor Engine 720.
12.2(33)SXI2 This command was integrated into Cisco IOS Release 12.2(33)SXI2.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA. This
release does not support the evc parameter.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR. This
release does not support the level keyword used to configure CFM Draft 1.0.
Comments to this Manuals