-596
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
show policy-map interface
Two-Rate Traffic Policing: Example
The following is sample output from the show policy-map interface command when two-rate traffic
policing has been configured. In the example below, 1.25 Mbps of traffic is sent (“offered”) to a policer
class.
Router# show policy-map interface serial3/0
Serial3/0
Service-policy output: policy1
Class-map: police (match all)
148803 packets, 36605538 bytes
30 second offered rate 1249000 bps, drop rate 249000 bps
Match: access-group 101
police:
cir 500000 bps, conform-burst 10000, pir 1000000, peak-burst 100000
conformed 59538 packets, 14646348 bytes; action: transmit
exceeded 59538 packets, 14646348 bytes; action: set-prec-transmit 2
violated 29731 packets, 7313826 bytes; action: drop
conformed 499000 bps, exceed 500000 bps violate 249000 bps
Class-map: class-default (match-any)
19 packets, 1990 bytes
30 seconds offered rate 0 bps, drop rate 0 bps
Fields Associated with Traffic Shaping (if Enabled)
Target Rate Rate used for shaping traffic.
Byte Limit Maximum number of bytes that can be transmitted per interval. Calculated
as follows:
((Bc+Be) /8) x 1
Sustain bits/int Committed burst (Bc) rate.
Excess bits/int Excess burst (Be) rate.
Interval (ms) Time interval value in milliseconds (ms).
Increment (bytes) Number of credits (in bytes) received in the token bucket of the traffic
shaper during each time interval.
Queue Depth Current queue depth of the traffic shaper.
Packets Total number of packets that have entered the traffic shaper system.
Bytes Total number of bytes that have entered the traffic shaper system.
Packets Delayed Total number of packets delayed in the queue of the traffic shaper before
being transmitted.
Bytes Delayed Total number of bytes delayed in the queue of the traffic shaper before
being transmitted.
Shaping Active Indicates whether the traffic shaper is active. For example, if a traffic
shaper is active, and the traffic being sent exceeds the traffic shaping rate,
a “yes” appears in this field.
1. A number in parentheses may appear next to the service-policy output name, class-map name, and match criteria
information. The number is for Cisco internal use only and can be disregarded.
Table 1-50 show policy-map interface Field Descriptions
1
(continued)
Field Description
Comments to this Manuals