Cisco MWR 2941 Installation Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 710
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
-13
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
bandwidth (policy-map class)
bandwidth (policy-map class)
To specify or modify the bandwidth allocated for a class belonging to a policy map, or to enable ATM
overhead accounting, use the bandwidth command in policy-map class configuration mode. To remove
the bandwidth specified for a class or disable ATM overhead accounting, use the no form of this
command.
bandwidth {bandwidth-kbps | remaining percent percentage | percent percentage}
no bandwidth
Syntax Description
Command Default No bandwidth is specified.
ATM overhead accounting is disabled.
Command Modes Policy-map class configuration (config-pmap-c)
Command History
bandwidth-kbps Amount of bandwidth, in kilobits per second (kbps), to be assigned to the
class. The amount of bandwidth varies according to the interface and platform
in use.
remaining percent
percentage
Percentage of guaranteed bandwidth based on a relative percent of available
bandwidth. The range is from 1 to 100.
percent percentage Percentage of guaranteed bandwidth based on an absolute percent of available
bandwidth that is set aside for the priority class. The range is from 1 to 100.
Release Modification
12.0(5)T This command was introduced.
12.0(5)XE This command was integrated into Cisco IOS Release 12.0(5)XE and was
implemented on Versatile Interface Processor (VIP)-enabled Cisco 7500
series routers.
12.0(7)T The percent keyword was added.
12.0(17)SL This command was introduced on the Cisco 10000 series router.
12.0(22)S Support for the percent keyword was added on the Cisco 10000 series router.
12.0(23)SX Support for the remaining percent keyword was added on the Cisco 10000
series router.
12.1(5)T This command was implemented on VIP-enabled Cisco 7500 series routers.
12.2(2)T The remaining percent keyword was added.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(31)SB This command was implemented on the Cisco 10000 series routers.
12.2(31)SB2 This command was introduced on the PRE3 for the Cisco 10000 series router,
and was enhanced for ATM overhead accounting on the Cisco 10000 series
router for the PRE3.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
Page view 12
1 ... 12 13 14 ... 710

Comments to this Manuals

No comments