-528
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
show ethernet oam discovery
show ethernet oam discovery
To display discovery information for all Ethernet operations, maintenance, and administration (OAM)
interfaces or for a specific interface, use the show ethernet oam discovery command in privileged
EXEC mode.
show ethernet oam discovery [interface type number]
Syntax Description
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines This command displays the following information pertaining to Ethernet OAM discovery:
• Remote device which is directly connected to this device
• Local and remote OAM configuration and capability
• Local and remote OAM mode
• Remote platform identity
• State of the local discovery state machine
If an interface is specified, only data pertaining to the OAM peer on that interface is displayed;
otherwise, data for all OAM peers (on all interfaces) is displayed.
Examples The following example shows output from a show ethernet oam discovery command for interface
GigabitEthernet 6/11:
Router# show ethernet oam discovery interface gigabitethernet6/11
GigabitEthernet6/11
Local client
------------
Administrative configurations:
Mode: active
Unidirection: not supported
interface (Optional) Specifies an interface.
type (Optional) Type of Ethernet interface. Valid values are: FastEthernet,
GigabitEthernet.
number (Optional) Integer from 1 to 9 that is the number of the Ethernet interface.
Release Modification
12.2(33)SRA This command was introduced.
12.4(15)T This command was integrated into Cisco IOS Release 12.4(15)T.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Comments to this Manuals