-498
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
show ethernet cfm errors
show ethernet cfm errors
To display connectivity fault management (CFM) continuity check error conditions logged on a device
since it was last reset or since the log was last cleared, use the show ethernet cfm errors command in
privileged EXEC mode.
CFM IEEE 802.1ag Standard (CFM IEEE)
show ethernet cfm errors [configuration | domain-id {mac address | domain-name | dns dns-name
| null} [service {ma-name | ma-num | vlan-id vlan-id | vpn-id vpn-id}]]
Syntax Description
Command Default In CFM IEEE, when no maintenance domain is specified, errors for all domains are displayed.
In CFM D1, when no maintenance domain or maintenance level is specified, errors for all domains and
all levels are displayed.
Command Modes Privileged EXEC (#)
Command History
domain (Optional) Indicates that a maintenance domain is specified.
domain-name (Optional) String of a maximum of 154 characters.
configuration (Optional) Displays the configuration error list information; for example,
port, VLAN, and error condition.
domain-id (Optional) Displays by domain ID.
mac-address (Optional) MAC address of the maintenance domain.
dns (Optional) Displays a domain name service (DNS).
dns-name (Optional) String of a maximum of 43 characters.
null (Optional) Indicates there is not a domain name.
service (Optional) Displays a maintenance association within the domain.
ma-name (Optional) String that identifies the maintenance association.
ma-num (Optional) Integer that identifies the maintenance association.
vlan-id (Optional) Displays a VLAN.
vlan-id (Optional) Integer from 1 to 4094 that identifies the VLAN.
vpn-id (Optional) Displays a virtual private network (VPN).
vpn-id (Optional) Integer from 1 to 32767 that identifies the VPN.
Release Modification
12.2(33)SRA This command was introduced.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)SXI2 This command was integrated into Cisco IOS Release 12.2(33)SXI2.
Comments to this Manuals