-42
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
clear ethernet cfm errors
Usage Guidelines Use the clear ethernet cfm errors command to purge error database entries that are not needed and
when you want to work with a cleared database. Also, use this command with a specified domain if you
want to clear errors for that domain.
In CFM IEEE, if a domain name has more than 43 characters, a warning message is displayed notifying
that the maintenance domain ID (MDID) will be truncated to 43 characters in continuity check messages
(CCMs) if “id <fmt> <MDID>” is not configured.
Examples The following example shows a clear ethernet cfm errors command for errors at maintenance level 3.
No output is generated when this command is issued.
Router# clear ethernet cfm errors level 3
The following example shows how to clear errors for a DNS on VLAN 17. No output is generated when
this command is issued.
Router# clear ethernet cfm errors domain-id dns Service10 service vlan-id 17
Related Commands
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR. This
release does not support Ethernet Connectivity Fault Management (CFM)
Cisco Proprietary Draft 1 (CFM D1).
15.1(3)MR This command was integrated into Cisco IOS Release 15.1(3)MR.
Release Modification
Command Description
show ethernet cfm errors Displays CFM continuity check error conditions logged on a device
since it was last reset or since the log was last cleared.
Comments to this Manuals