-145
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
ethernet oam link-monitor frame-period
ethernet oam link-monitor frame-period
To configure an error frame period on an Ethernet operations, maintenance, and administration (OAM)
interface, use the ethernet oam link-monitor frame-period command in configuration template or
interface configuration mode. To remove the frame period, use the no form of this command.
ethernet oam link-monitor frame-period {threshold {high {none | high-frames} | low
low-frames} | window frames}
no ethernet oam link-monitor frame-period {threshold {high | low} | window}
Syntax Description
Command Default The ethernet oam link-monitor frame-period command is not configured.
Command Modes Configuration template (config-template)
Interface configuration (config-if)
Command History
Usage Guidelines The ethernet oam link-monitor frame-period command configures an error frame period in number of
frames. When a high threshold is configured, it must be at least as great as the low threshold for frame
errors.
threshold Sets a number of error frames for the period at, above, or below which an
action is triggered.
high Sets a high threshold for the error frame period in number of frames.
none Disables a high threshold.
high-frames Integer in the range of 1 to 65535 that is the high threshold in number of
frames. There is no default. The high threshold must be configured.
low Sets a low threshold for the error frame period in number of frames.
low-frames Integer in the range of 0 to 65535 that is the low threshold in number of
frames. The default is 1.
window Sets a polling window and window size.
frames Integer in the range of 1 to 65535 that is the window size in number of
frames. Each value is a multiple of 10000. The default is 1000.
Release Modification
12.2(33)SRA This command was introduced.
12.4(15)T This command was integrated into Cisco IOS Release 12.4(15)T.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Comments to this Manuals