Cisco MWR 2941 Installation Manual download pdf (Page 599)

100

101

-599

Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR

OL-26895-01

Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR

show policy-map interface

police:

cir 20 % bc 10 ms

cir 2000000 bps, bc 2500 bytes

pir 40 % be 20 ms

pir 4000000 bps, be 10000 bytes

conformed 0 packets, 0 bytes; actions:

transmit

exceeded 0 packets, 0 bytes; actions:

drop

violated 0 packets, 0 bytes; actions:

drop

conformed 0 bps, exceed 0 bps, violate 0 bps

Table 1-53 describes the significant fields shown in the display.

Table 1-53 show policy-map interface Field Descriptions—Configured for Percentage-Based

Policing and Shaping

1. A number in parentheses may appear next to the service-policy output name and the class-map name. The number is for

Cisco internal use only and can be disregarded.

Field Description

Service-policy output Name of the output service policy applied to the specified interface or VC.

Class-map Class of traffic being displayed. Output is displayed for each configured

class in the policy. The choice for implementing class matches (for

example, match-all or match-any) can also appear next to the traffic class.

packets, bytes Number of packets (also shown in bytes) identified as belonging to the

class of traffic being displayed.

offered rate Rate, in kbps, of packets coming in to the class.

Note If the packets are compressed over an outgoing interface, the

improved packet rate achieved by packet compression is not

reflected in the offered rate. Also, if the packets are classified

before they enter a combination of tunnels (for example, a generic

routing encapsulation (GRE) tunnel and an IP Security (IPSec)

tunnel), the offered rate does not include all the extra overhead

associated with tunnel encapsulation in general. Depending on the

configuration, the offered rate may include no overhead, may

include the overhead for only one tunnel encapsulation, or may

include the overhead for all tunnel encapsulations. In most of the

GRE and IPSec tunnel configurations, the offered rate includes the

overhead for GRE tunnel encapsulation only.

police Indicates that traffic policing based on a percentage of bandwidth has been

enabled. Also, displays the bandwidth percentage, the CIR, and the

committed burst (Bc) size in ms.

conformed, actions Displays the number of packets and bytes marked as conforming to the

specified rates, and the action to be taken on those packets.

exceeded, actions Displays the number of packets and bytes marked as exceeding the

specified rates, and the action to be taken on those packets.

1 ... 598 599 600 ... 710

Comments to this Manuals

No comments

Cisco MWR 2941 Installation Manual Page 599

Comments to this Manuals

Related products and manuals for Networking Cisco MWR 2941