Cisco MWR 2941 Installation Manual Page 185

  • Download
  • Add to my manuals
  • Print
  • Page
    / 710
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 184
-185
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
ip ospf bfd
ip ospf bfd
To enable Bidirectional Forwarding Detection (BFD) on a specific interface configured for Open
Shortest Path First (OSPF), use the ip ospf bfd command in interface configuration mode. To disable
BFD on the OSPF interface, use the disable keyword. To remove the ip ospf bfd command, use the no
form of this command.
ip ospf bfd [disable]
no ip ospf bfd
Syntax Description
Defaults When the disable keyword is not used, the default behavior is to enable BFD support for OSPF on the
interface.
Command Modes Interface configuration
Command History
Usage Guidelines Enter the ip ospf bfd command to configure an OSPF interface to use BFD for failure detection. If you
have used the bfd-all interfaces command in router configuration mode to globally configure all OSPF
interfaces for an OSPF process to use BFD, you can enter the ip ospf bfd command in interface
configuration mode with the disable keyword to disable BFD for a specific OSPF interface.
Examples In the following example, the interface associated with OSPF, Fast Ethernet interface 3/0, is configured
for BFD:
Router> enable
Router# configure terminal
Router(config)# interface gigabitethernet 3/0
Router(config-if)# ip ospf bfd
Router(config-if)# end
disable (Optional) Disables BFD for OSPF on a specified interface.
Release Modification
12.2(18)SXE This command was introduced.
12.0(31)S This command was integrated into Cisco IOS Release 12.0(31)S.
12.4(4)T This command was integrated into Cisco IOS Release 12.4(4)T.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SB This command was integrated into Cisco IOS Release 12.2(33)SB.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Page view 184
1 ... 184 185 186 ... 710

Comments to this Manuals

No comments