Cisco MWR 2941 Installation Manual Page 614

  • Download
  • Add to my manuals
  • Print
  • Page
    / 710
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 613
-614
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
show rep topology
show rep topology
Use the show rep topology User EXEC command to display Resilient Ethernet Protocol (REP) topology
information for a segment or for all segments, including the primary and secondary edge ports in the
segment.
show rep topology [segment segment_id] [archive] [detail] [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines The output of this command is also included in the show tech-support privileged EXEC command
output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is a sample output from the show rep topology segment privileged EXEC command:
Switch # show rep topology segment 1
REP Segment 1
BridgeName PortName Edge Role
---------------- ---------- ---- ----
sw1_multseg_3750 Gi1/1/1 Pri Alt
sw3_multseg_3400 Gi0/13 Open
sw3_multseg_3400 Gi0/14 Alt
sw4_multseg_3400 Gi0/13 Open
segment-id (Optional) Display REP topology information for the specified segment. The ID
range is from 1 to 1024.
archive (Optional) Display the previous topology of the segment. This keyword can be
useful for troubleshooting a link failure.
detail (Optional) Display detailed REP topology information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)SE This command was introduced.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was updated to display information for REP no-neighbor
interfaces. The command output displays a * to indicate a no-neighbor
interfaces; with the detail keyword, the command output displays
No-Neighbor next to no-neighbor interfaces.
Page view 613
1 ... 613 614 615 ... 710

Comments to this Manuals

No comments