-443
Cisco MWR 2941 Mobile Wireless Edge Router Release 3.5 Command Reference, Cisco IOS Release 15.1(3)MR
OL-26895-01
Chapter Cisco MWR 2941 Router Command Reference, Release 15.1(3)MR
set qos-group
set qos-group
To set a quality of service (QoS) group identifier (ID) that can be used later to classify packets, use the
set qos-group command in policy-map class configuration mode. To remove the group ID, use the no
form of this command.
set qos-group {group-id}
no set qos-group {group-id}
Syntax Description
Command Default No group ID is specified.
Command Modes Policy-map class configuration (config-pmap-c)
Command History
Usage Guidelines The set qos-group command allows you to associate a group ID with a packet. The group ID can be used
later to classify packets into QoS groups based as prefix, autonomous system, and community string.
A QoS group and discard class are required when the input per-hop behavior (PHB) marking will be used
for classifying packets on the output interface.
group-id Group ID number in the range from 0 to 99.
Release Modification
11.1CC This command was introduced.
12.0(5)XE This command was integrated into Cisco IOS Release 12.0(5)XE.
12.0(17)SL This command was introduced on the Cisco 10000 series router.
12.2(13)T This command can now be used with the random-detect
discard-class-based command, and this command was modified for the
Enhanced Packet Marking feature. A mapping table (table map) can now be
used to convert and propagate packet-marking values.
12.2(18)SXE This command was integrated into Cisco IOS 12.2(18)SXE, and the cos
keyword was added.
12.2(31)SB This command was integrated into Cisco IOS Release 12.2(31)SB.
Cisco IOS XE
Release 2.1
This command was implemented on Cisco ASR 1000 series routers.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR. This
release does not support the from-field and table options.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA. This
release does not support the from-field and table options.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR. This
release does not support WRED.
Comments to this Manuals