Cisco SCE 1000 2xGBE User's Guide download pdf (Page 114)

100

101

Chapter 4 Installation and Startup

Connecting the line ports to the network

SCE 1000 2xGBE Release 2.0.10 User Guide

4-52 OL-7117-02

Connecting Subscriber Side Interface to the SCE 1000

Figure 4-21: Connecting the Subscriber Side Cable (via Port 1)

To connect the subscriber side cable to the SCE 1000:

Step 1 Take the fiber optic cable that is connected toward the subscriber line, and plug it into

Gigabit Ethernet Subscriber port on the front panel of the SCE 1000.

Make sure to push on the connector until you hear a click, which indicates that the

connector is fully inserted and secured in the receptacle. Always make sure that you

insert the connector completely into the socket.

Rx and Tx are clearly marked on the front panel of the SCE 1000 to assist in preventing

incorrect connector insertion.

Step 2 Verify that the link LED is green.

If the link LED does not light, try removing the network cable plug and reinserting it

firmly into the module socket.

1 ... 113 114 115 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 114

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE