Cisco SCE 1000 2xGBE User's Guide Page 117

  • Download
  • Add to my manuals
  • Print
  • Page
    / 490
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 116
Chapter 4 Installation and Startup
Loading and Activating a Service Control Application
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 4-55
EXAMPLE:
The following example shows the counters of the first Gigabit Ethernet interface:
SCE 1000#show interface Gigabit Ethernet 0/1 counters
In total octets: 100
In good unicast packets: 90
In good multicast packets: 0
In good broadcast packets: 10
In packets discarded: 0
In packets with CRC/Alignment error: 0
In undersized packets: 0
In oversized packets: 0
Out total octets: 93*2^32+1022342538
Out unicast packets: 858086051
Out non unicast packets: 0
Out packets discarded: 0
You are now ready to continue to the next stage, loading and activating an Service Control
Application.
Loading and Activating a Service Control Application
The SCE 1000 platform provides the basic functionalities of Service Control analysis and
enforcement. A Service Control solution requires that a Service Control application be loaded into
the platform, to take advantage of the unique SCE platform capabilities.
Loading and activating an application includes the following stages:
Downloading the application provided as an SLI file to the SCE 1000 disk.
Activating the SCE 1000 application.
Configuring the SCE 1000 application.
The detailed procedure of how to perform these operations is not specified and described in this
manual. For further details, refer to the relevant Service Control application user guide or
installation guide.
Final Tests
This section discusses the final tests that you need to perform to verify that the SCE 1000 is
functioning properly.
Verifying Operational Status
After all the ports are connected, verify that the SCE 1000 is not in a Warning state.
To verify that the SCE 1000 is not in a warning state:
Step 1 On the SCE 1000 Front panel, examine that the Status LED is flashing green.
Step 2 To display the operation status of the system, at the SCE 1000# prompt, type show
system operation-status and press Enter.
Page view 116
1 ... 116 117 118 ... 490

Comments to this Manuals

No comments