Chapter 6 Control Configuration
Domain Name (DNS) Settings
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 6-17
To enable DNS lookup:
Step 1 From the SCE 1000(config)# prompt, type ip domain-lookup.
To disable DNS lookup:
Step 1 From the SCE 1000(config)# prompt, type no ip domain-lookup.
Name Servers
To specify the address of one or more name servers to use for name and address resolution:
Step 1 From the SCE 1000(config)# prompt, type ip name-server <server-
address1> [<server-address2> [<server-address3>]], and press
Enter.
The addresses of the name servers are set.
EXAMPLE:
The following example shows how to configure the two name server (DNS) IP addresses.
SCE 1000(config)#ip name-server 10.1.1.60 10.1.1.61
To remove the name server address:
Step 1 From the SCE 1000(config)# prompt, type no ip name-server <server-
address1> [<server-address2> [<server-address3>]], and press
Enter.
The addresses of the name servers are removed.
EXAMPLE:
The following example shows how to remove the name server (DNS) IP address.
SCE 1000(config)#no ip name-server 10.1.1.60 10.1.1.61
Comments to this Manuals