Cisco SCE 1000 2xGBE User's Guide download pdf (Page 296)

100

101

Appendix A

Global Configuration Mode Commands

SCE 1000 2xGBE Release 2.0.10 User Guide

A-26 OL-7117-02

RDR-formatter destination ip-address port port-number [category {name category name }| {number

[1-4]}] [priority priority-value]

Configures an RDR destination entry. Up to four entries can be configured. Each entry must have

a different priority. The entry with the highest priority is used by the RDR formatter, provided that

a connection with this destination can be established. This is where the RDR–formatter sends the

events produced by the LineCard Interface.

Authorization admin

Mode Global Configuration

ARAMETERS

ip-address The destination IP address.

port-number The destination port number.

category Use this parameter to assign a priority to a particular category for this

destination. The category may be identified by either a user-defined

name or number (1 to 4).

Assign a high priority to send RDRs from the specified category to

this destination. Assign a low priority if RDRs from the specified

category should not be sent to this destination.

priority-value The priority of the destination. The priority value may be any

number between 1 (lowest) to 100 (highest).

For the first entry, if no priority is set, the highest priority is

automatically assigned.

For all subsequent entries, the priority must be explicitly defined.

It is also possible to assign a different priority to each category for

each destination. If no category is specified, the same priority is

assigned to both categories for that destination.

XAMPLES:

The following example configures an RDR-formatter destination with the default priority

(highest) both categories.

SCE 1000(config)#RDR-formatter destination 10.1.1.205 port 33000

SCE 1000(config)#

The following example configures an RDR-formatter destination with a different priority for each

category. This configuration will send RDRs from category 2 to this destination, but not RDRs

from category 1.

SCE 1000(config)#RDR-formatter destination 10.1.1.206 port 34000 category

number 1 priority 10 category number 2 priority 90

SCE 1000(config)#

1 ... 295 296 297 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 296

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE