Cisco SCE 1000 2xGBE User's Guide Page 288

  • Download
  • Add to my manuals
  • Print
  • Page
    / 490
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 287
Appendix A
Global Configuration Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-18 OL-7117-02
[no] ip name-server server-address1 [server-address2] [server-address3]
Specifies the address of 1–3 servers to use for name and address resolution. The system maintains
a list of up to 3 name servers. If the current list is not empty, this command adds the specified
servers to the list. The [no] form of this command removes specified servers from the current list.
Authorization admin
Mode Global Configuration
P
ARAMETERS
server-address1 The IP address of the name server.
server-address2 The IP address of an additional name server.
server-address3 The IP address of an additional name server.
E
XAMPLE:
The following example adds the DNS 10.1.1.60 and 10.1.1.61 to the configured servers list.
SCE 1000(config)#ip name-server 10.1.1.60 10.1.1.61
SCE 1000(config)#
[no] ip rmi-adapter
Enables the RMI adapter. Use the “no” form of this command to disable the RMI adapter.
Authorization admin
Mode Global Configuration
E
XAMPLE:
The following example enables the RMI adapter.
SCE 1000(config)# ip rmi-adapter
ip rmi-adapter port port-number
Defines the RMI adapter port.
Authorization admin
Mode Global Configuration
P
ARAMETERS
port-number The number of the port assigned to the RMI adapter.
E
XAMPLE:
The following example shows how to configure the RMI interface, specifying 1299 as the RMI
adapter port.
SCE 1000(config)#ip rmi-adapter
SCE 1000(config)#ip rmi-adapter port 1299
Page view 287
1 ... 287 288 289 ... 490

Comments to this Manuals

No comments