Appendix A
Privileged Exec Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 A-67
configure
Enables the user to move from Privileged Exec Mode to Configuration Mode.
Authorization admin
Mode Privileged EXEC
U
SAGE GUIDELINES
• After the user enters the configure command, the system prompt changes from <host-
name># to <host-name>(config)#, indicating that the system is in Global
Configuration Mode. To leave Global Configuration Mode and return to the Privileged Exec
Mode prompt, type exit.
E
XAMPLE:
The following example enters the Global Configuration Mode.
SCE 1000#configure
SCE 1000(config)#
copy ftp://username[:password]@server-address[ :port]/path/source-file destination-file
Downloads a file from a remote station to the local flash file system, using FTP.
Authorization admin
Mode Privileged EXEC
P
ARAMETERS
username The username known by the FTP server.
password The password of the given username.
server-address The dotted decimal IP address of the FTP server.
Port Optional port number on the FTP server.
source-file The name of the source file located in the on the server.
destination-file The name of the file to be saved in the local flash file system. The
file should be in 8.3 format, that is 8 digits, dot, then 3 digits.
U
SAGE GUIDELINES
• Use the following syntax for remote upload/download using FTP:
ftp://username[:password]@serveraddress[:port]/path/file
• You can configure keyword shortcuts for the copy command using the following commands:
• IP ftp password to configure a password shortcut.
• IP ftp username to configure a username shortcut.
E
XAMPLE:
The following example downloads the ftp.sli file from the host 10.1.1.105 with user name
“vk” and password “vk”.
SCE 1000#
Comments to this Manuals