Chapter 5 Configuration and Management
Entering and Exiting Global Configuration Mode
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 5-15
EXAMPLE:
The following example displays a saved configuration file and then restores the file to overwrite
the current configuration.
SCE 1000#more tffs0:system/prevconf/config.tx1
#This is a general configuration file (running-config).
#Created on 19:36:07 UTC THU February 14 2002
#cli-type 1
#version 1
interface LineCard 0
no silent
no shutdown
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
exit
SCE 1000#copy tffs0:system/prevconf/config.tx1 tffs0:system/config.txt
SCE 1000#
Entering and Exiting Global Configuration Mode
To enter the Global Configuration Mode:
Step 1 At the SCE 1000# prompt, type configure, and press Enter.
The SCE 1000(config)# prompt appears.
To exit the Global Configuration Mode:
Step 1 At the SCE 1000(config)# prompt, type exit and press Enter.
The SCE 1000# prompt appears.
Comments to this Manuals