Cisco SCE 1000 2xGBE User's Guide Page 155

  • Download
  • Add to my manuals
  • Print
  • Page
    / 490
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 154
Chapter 6 Control Configuration
IP Configuration
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 6-9
EXAMPLE:
SCE 1000#show ip route
gateway of last resort is 10.1.1.1
| prefix | mask | next hop |
|-----------------|------------------|-----------------|
| 10.2.0.0 | 255.255.0.0 | 10.1.1.250 |
| 10.3.0.0 | 255.255.0.0 | 10.1.1.253 |
| 198.0.0.0 | 255.0.0.0 | 10.1.1.251 |
| 10.1.60.0 | 255.255.255.0 | 10.1.1.5 |
To use show ip route prefix command to display routing entries from the subnet specified by the
prefix and mask pair:
Step 1 From the SCE 1000# prompt, type show ip route prefix mask and press Enter.
Routing entries with this prefix and mask pair appear.
EXAMPLE:
SCE 1000#show ip route 10.1.60.0 255.255.255.0
| prefix | mask | next hop |
|-----------------|-----------------|-----------------|
| 10.1.60.0 | 255.255.255.0 | 10.1.1.5 |
SCE 1000#
IP Advertising
IP advertising is the act of periodically sending Ping requests to a configured address at
configured intervals. This maintains the SCE 1000 IP/MAC addresses in the memory of adaptive
network elements, such as switches, even during a long period of inactivity.
The following commands are relevant to IP advertising:
[no] ip advertising
ip advertising destination
ip advertising interval
default ip advertising destination
default ip advertising interval
show ip advertising
show ip advertising destination
show ip advertising interval
Page view 154
1 ... 154 155 156 ... 490

Comments to this Manuals

No comments