Cisco SCE 1000 2xGBE User's Guide download pdf (Page 250)

100

101

Chapter 10 Troubleshooting

Front Panel LEDs

SCE 1000 2xGBE Release 2.0.10 User Guide

10-2 OL-7117-02

• Resolution column: Assists in resolving the problem, and refers to the relevant chapter for

further instructions. In most cases, you will need to refer to these chapters for detailed

information.

Front Panel LEDs

The front panel LEDS are the most immediate problem-detection mechanism of the platform.

This section explains the different problems that might be indicated by the LED and their

immediate resolution.

In CLI commands for the Gigabit Ethernet interfaces, # stands for the number of the interface.

This could be 1 or 2.

Table 10-1 Front Panel LEDs

Symptom How to look for the

specific cause

Possible Cause Resolution

Status LED is

flashing orange

CLI commands:

show system operation-

status

System operation status is

Warning.

Platform is in Warning

status.

One or more of the

GBE port LEDs are

unlit

CLI commands:

show interface

GigabitEthernet

0/# counters

Output counters are

incrementing.

GBE interface link

LED problem.

If GBE counters are

incrementing, this

indicates LED

problem. Contact

customer support.

Output counters are not

incrementing.

Line ports GBE links

are down. See

For possible causes, see

below.

Cable is broken

Connector is not

connected to the

platform or to the

network

Reconnect / replace

the cable to the GBE

port.

1 ... 249 250 251 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 250

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE