Cisco SCE 1000 2xGBE User's Guide download pdf (Page 302)

100

101

Appendix A

Global Configuration Mode Commands

SCE 1000 2xGBE Release 2.0.10 User Guide

A-32 OL-7117-02

[no] snmp-server host address [traps] [version version] community-string

Sets destination hosts for SNMP traps.

Default No hosts

Authorization admin

Mode Global Configuration

ARAMETERS

address The IP address of the SNMP server host.

traps Optional switch, does not influence command functionality.

version Version of the SCE 1000 software running in the system. Can be set to 1 or

2c.

community-string The SNMPv1 and SNMPv2c security string that identifies a

community of managers that are able to access the SNMP server.

SAGE GUIDELINES

• If no communities are specified by the snmp-server community command, the

community string specified by this command is used by the SCE 1000, as if an snmp-

server community community-string ro was given.

XAMPLE:

The following example adds a host destination for SNMP traps.

SCE 1000(config)#snmp-server host 10.1.1.205 version 2c public

SCE 1000(config)#

no snmp-server host all

Removes all configured hosts.

Authorization admin

Mode Global Configuration

[no] snmp-server location location

Gives a name to the SCE 1000 location, setting the MIB-2 variable sysLocation. Use the [no]

form of this command to remove the location setting.

Default no location

Authorization admin

Mode Global Configuration

ARAMETERS

location A string that specifies the system location.

XAMPLE:

The following example configures the system location.

SCE 1000(config)#snmp-server location London_Office

SCE 1000(config)#

1 ... 301 302 303 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 302

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE