Cisco SCE 1000 2xGBE User's Guide Page 125

  • Download
  • Add to my manuals
  • Print
  • Page
    / 490
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 124
Chapter 5 Configuration and Management
Viewing Configuration and Status
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 5-7
EXAMPLE:
The following example uploads the analysis.sli file located on the local flash file system to
the host 10.1.1.105, specifying Passive FTP.
SCE 1000#copy-passive /appli/analysis.sli
ftp://myname:[email protected]/p:/appli/analysis.sli
SCE 1000#
Displaying File Contents
To display the contents of a file:
Step 1 From the SCE 1000# prompt, type more file-name and press Enter.
The contents of the specified file are displayed and the SCE 1000# prompt appears.
Unzipping a File
Use this command to unzip a file. The specified file must be a zip file.
Files are extracted to the current directory.
To unzip a file:
Step 1 From the SCE 1000# prompt, type unzip file-name and press Enter.
The specified file is extracted to the current directory and the SCE 1000# prompt
appears.
Viewing Configuration and Status
When you enter configuration commands, it immediately effects the SCE 1000 operation and
configuration. This configuration, referred to as the running-config, is saved in the SCE
1000 volatile memory and is effective while the SCE 1000 is up. After reboot, the SCE 1000
loads the startup-config, which includes the non-default configuration as saved by the user,
into the running-config.
The SCE 1000 provides commands for:
Viewing the running configuration
Viewing the startup configuration
Viewing the settings of a partial group or individual parameters from the global or the
interfaces configuration.
Viewing dynamic data, such as counters or SCE status.
Page view 124
1 ... 124 125 126 ... 490

Comments to this Manuals

No comments