Appendix A
Privileged Exec Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-60 OL-7117-02
[no] attack-filter slot-number force-filter
Forces attack filtering for a specified IP address/protocol. When attack filtering has been forced, it
continues until explicitly stopped by another CLI command (either specific or general).
Use the [no] form of this command to stop attack filtering.
Authorization admin
Mode Privileged EXEC
P
ARAMETERS
slot-number The number of the identified slot. Enter a value of 0.
ip IP address from which traffic will not be filtered.
action report
block
protocol TCP
UDP
IMCP
other
attack-direction attack-source
attack-destination
both
side subscriber
network
both
U
SAGE GUIDELINES
• Use the "all" keyword to stop all filtering.
E
XAMPLE 1:
The following example forces attack filtering.
SCE 1000#attack-filter 0 action block ip 10.10.10.10 protocol TCP attack-
direction attack-source side both
EXAMPLE 2:
The following example undoes all forced attack filtering.
SCE 1000#no attack-filter 0 force-filter all
Comments to this Manuals