Cisco SCE 1000 2xGBE User's Guide download pdf (Page 77)

100

101

Chapter 4 Installation and Startup

Connecting to the Power Supply

SCE 1000 2xGBE Release 2.0.10 User Guide

OL-7117-02 4-15

Attaching a Chassis Ground Connection

Before you connect the power or turn on the power to the SCE 1000, Cisco strongly recommends

that you provide an adequate chassis Ground (protective earth) connection for the SCE 1000

chassis. A Chassis Grounding cable kit is provided with each SCE 1000.

Use the Ground wire kit to properly ground the SCE 1000 chassis (see Packing List ("Packing

List Parts" on page 4-2) for details).

To connect the grounding cable to the chassis grounding connector on the SCE 1000:

Step 1 From the enclosed Grounding kit, remove the necessary materials: the grounding cable

(green and yellow colored cable) and pairs of hex nuts and spring washers.

Step 2 On the Rear panel of the SCE 1000, locate the chassis grounding connector (refer to the

appropriate figure below).

Step 3 Attach the grounding cable (green and yellow colored cable), firmly fastening the

(enclosed) hex nuts and spring washers with a #¼” hex wrench (refer to the appropriate

figure below).

The grounding cable must be connected on the other side to the site equivalent of the AC

earth.

Figure 4-12: Grounding the Unit (AC)

1 ... 76 77 78 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 77

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE