Cisco SCE 1000 2xGBE User's Guide download pdf (Page 91)

100

101

Chapter 4 Installation and Startup

System Configuration

SCE 1000 2xGBE Release 2.0.10 User Guide

OL-7117-02 4-29

All values are Internet addresses of the form ‘X.X.X.X’, where each letter corresponds to a

decimal number between 0 and 255.

To configure the initial settings:

Step 1 The current IP address is displayed.

• To accept the displayed value, press Enter.

• To change the value, type the desired value in the format “x.x.x.x” and press Enter.

Step 2 The current subnet mask is displayed.

• To accept the displayed value, press Enter.

• To change the value, type the desired value in the format “x.x.x.x” and press Enter.

Step 3 The current IP address of the default gateway is displayed.

• To accept the displayed value, press Enter.

• To change the value, type the desired value in the format “x.x.x.x” and press Enter.

EXAMPLE:

The following example displays a typical configuration of the IP address (10.1.5.109), subnet

mask (255.255.0.0), and default gateway (10.1.1.3).

Since the IP address and the subnet mask are related, when the IP address is changed, there is no

longer a default value of the subnet mask, and it must be entered explicitly.

Enter IP address [10.1.1.201]:10.1.5.109

Enter IP subnet mask:255.255.0.0

Enter IP address of default gateway [10.1.1.3]:

Step 2: Configuring the Hostname

The hostname is used to identify the SCE 1000. It appears as part of the CLI prompt and is also

returned as the value of the MIB-II object sysName.

The default hostname is SCE 1000.

To configure the hostname:

Step 1 The current hostname is displayed.

• To accept the displayed value, press Enter.

• To change the value, type any desired character string and press Enter.

Enter hostname [SCE 1000]:

1 ... 90 91 92 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 91

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE