Cisco SCE 1000 2xGBE User's Guide Page 318

  • Download
  • Add to my manuals
  • Print
  • Page
    / 490
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 317
Appendix A
LineCard Interface Configuration Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-48 OL-7117-02
tos-marking set-table-entry class class color color value value
The SCE 1000 supports configuration via CLI of the mapping between the class and coloring and
the exposed DSCP (Diffserv Code Points) values. The default of this table is direct mapping of the
Diffserv standard code points.
The TOS table reads the class and color of the packet being transmitted, and assigns the value set
in the table according to the color and class.
Default Disserv defaults
Authorization admin
Mode LineCard Interface Configuration
P
ARAMETERS
class Internal class of service assigned to the packet. Legal values are BE, AF1,
AF2, AF3, AF4 and EF.
color Internal color assigned to the packet. Legal values are green, yellow,
red and any.
value Value of the TOS marking, assigned to the packet IP header, as transmitted by
the SCE 1000. This is a 6-bit value, expressed as a hex number in
the range 0x0 to 0x3f.
E
XAMPLE:
The following example sets a TOS marking table entry.
SCE 1000(config if)# tos-marking set-table-entry class AF4 color yellow
value 0x24
SCE 1000(config if)#
tos-marking reset-table
Reset TOS settings to the Disserv defaults.
Authorization admin
Mode LineCard Interface Configuration
E
XAMPLE:
The following example enables TOS marking.
SCE 1000(config if)#tos-marking reset-table
SCE 1000(config if)#
Page view 317
1 ... 317 318 319 ... 490

Comments to this Manuals

No comments