Chapter 4 Installation and Startup
Installation
SCE 1000 2xGBE Release 2.0.10 User Guide
4-6 OL-7117-02
Table 4-3 SCE 1000 DC Power Supply
Power Specification
DC power input -36 to -72 V DC
Power consumption up to 200W
Circuit breaker One Fast 10A for each power supplier
Table 4-4 SCE 1000 Environmental Requirements
Environmental Factor Requirement
Temperature - 23°F to 131°F (-5°C to +55°C)
Relative humidity 5% to 95% (non-condensing)
Table 4-5 SCE 1000 Approvals Specifications
Approval Specification
EMC
• USA - According to standard CFR 47. FCC rules and regulations PART 15
Subpart B. Methods and procedures ANSI 63/4/1992
• European Community - According to generic EMISSIONS standard EN
50081-2. Methods and procedures EN 55022, .
• European Community - EN 50082-1 (ESD, RFI, EFT, etc.) (Commercial)
• International - CISPR22
Safety UL60950, Full CE mark, EN60950
Warning
The SCE 1000 DC should be installed in a Restricted Access Location only.
Installation
This section provides instructions for the physical installation of the SCE 1000 platform,
including how to install the SCE 1000 in a rack, how to install the SCE 1000 on a tabletop or
workbench, how to attach cables, and how to connect the ground and electrical connections for
powering on the SCE 1000.
The SCE 1000 operates as either a tabletop or a rack-mounted unit. A rack-mounted kit is
included with the SCE 1000 when it is shipped from the factory. The kit provides the hardware
needed (see Packing List ("Packing List Parts" on page 4-2)) to mount the SCE 1000 in either of
two types of standard 19-inch equipment rack:
• 19-inch rack with only two posts in the front: Use the supporting brackets included in the kit
• 19-inch rack with only four posts, two in the front and two in the back: Use the crossrail
supports included in the kit
Comments to this Manuals