Appendix A
Global Configuration Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-14 OL-7117-02
interface LineCard slot-number
Enters LineCard Interface Configuration Mode.
Authorization admin
Mode Global Configuration
P
ARAMETERS
slot-number The number of the identified slot. Enter a value of 0.
U
SAGE GUIDELINES
• The system prompt changes to reflect the Line Card Configuration mode. To return to Global
Configuration Mode, type exit.
E
XAMPLE:
The following example enters LineCard Interface Configuration Mode.
SCE 1000(config)#interface LineCard 0
SCE 1000(config if)#
ip access-class number
Set the global IP access class. The access list defined here contains the definitions for all IP
addresses with permission to access the SCE 1000 system. IP addresses not permitted in this
access list cannot access or detect the SCE 1000, that is, even a ping command will receive no
response if it is not from a permitted IP address.
Authorization admin
Mode Global Configuration
Default none (all IP addresses can access the system)
E
XAMPLE:
The following example sets access list 1 as the global access list.
SCE 1000(config)#ip access-class 1
SCE 1000(config)#
no ip access-class
Resets global access to the SCE 1000 from any IP address.
Authorization admin
Mode Global Configuration
E
XAMPLE:
The following example resets global access.
SCE 1000(config)#no ip access-class
SCE 1000(config)#
Comments to this Manuals