Cisco SCE 1000 2xGBE User's Guide download pdf (Page 26)

100

101

Regulatory Compliance and Safety Information

Warning Definition Statement

SCE 1000 2xGBE Release 2.0.10 User Guide

xxiv OL-7117-02

Warning:

This unit may have more than one power supply cord. Disconnect all power supply cords before

servicing to avoid electric shock.

Chassis Power Connection Warning (DC platform only)

Warning:

Before connecting or disconnecting ground or power wires to the chassis, ensure that power is

removed from the DC circuit. To ensure that all power is OFF, locate the circuit breaker on the panel

board that services the DC circuit, switch the circuit breaker to the OFF position, and tape the switch

handle of the circuit breaker in the OFF position.

SELV Circuit Warning

Warning:

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network

voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits.

Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.

WAN Port Static Shock Warning

Warning:

Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF

or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables,

detach the end away from the unit first.

Class 1/I Laser Product Warning

Warning:

Class 1/I Laser product complying with 21CFR 1040.10 and 1040.11 and IEC 60825-1: 1993 + A1: 1997 +

A2:2001.

Battery Handling Warning

Warning:

There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with

the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to

the manufacturer’s instructions.

1 ... 25 26 27 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 26

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE