Cisco SCE 1000 2xGBE User's Guide download pdf (Page 54)

100

101

Chapter 3 Command Line Interface

Authorization and Command Levels (Hierarchy)

SCE 1000 2xGBE Release 2.0.10 User Guide

3-8 OL-7117-02

To return to the Global Configuration mode:

Step 1 Type exit.

Entering LineCard Interface Configuration Mode

The following procedure is for entering Line Card Interface Configuration mode. The procedures

for entering the other interfaces are the same except for the interface command as described above

and in CLI Command Reference (on page A-1).

To enter LineCard Interface Configuration mode:

Step 1 To enter Global Configuration Mode, at the SCE 1000# prompt, type configure, and

press Enter.

The SCE 1000(config)# prompt appears.

Step 2 Type interface LineCard 0, and press Enter.

The SCE 1000(config if)# prompt appears.

Step 3 To return to Global Configuration Mode, type exit and press Enter.

The SCE 1000(config)# prompt appears.

Step 4 To exit Global Configuration Mode, type exit and press Enter.

The SCE 1000# prompt appears.

Entering GigabitEthernet Line Interface Configuration Mode

To enter GigabitEthernet Interface Configuration Mode:

Step 1 To enter Global Configuration Mode, type configure and press Enter.

The SCE 1000(config)# prompt appears.

Step 2 Type interface GigaBitEthernet [0/1|0/2] and press Enter.

interface GigaBitEthernet 0/1 enables configuration of interface 1

interface GigaBitEthernet 0/2 enables configuration of interface 2

The SCE 1000(config if)# prompt appears.

1 ... 53 54 55 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 54

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE