Cisco SCE 1000 2xGBE User's Guide Page 423

  • Download
  • Add to my manuals
  • Print
  • Page
    / 490
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 422
Appendix B
Link Group: linkGrp (pcubeSEObjs 4)
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 B-29
linkOperMode (linkEntry 5)
The current operational mode of the link.
Possible values (LinkModeType):
Bypass: the traffic is forwarded from one port to the other using an internal splitter with no
processing taking place.
Forwarding: the traffic is forwarded by the internal hardware and software modules of the
SCE.
Sniffing: the traffic is forwarded in the same manner as in Bypass mode, however it passes
through and is analysed by the internal software and hardware modules of the SCE Platform.
Access RO
S
YNTAX
LinkModeType
linkStatusReflectionEnable (linkEntry 6)
Indicates whether failure of the physical link on one interface should trigger the failure of the link
on the other interface on the module.
Access RO
S
YNTAX
INTEGER {
1 (enabled)
2 (disabled)
}
linkSubscriberSidePortIndex (linkEntry 7)
An index value that uniquely identifies this link with the related port that is connected to the
subscriber side.
Access RO
S
YNTAX
INTEGER (0..255)
linkSubscriberSidePortIndex (linkEntry 8)
An index value that uniquely identifies this link with the related port that is connected to the
network side.
Access RO
S
YNTAX
INTEGER (0..255)
Page view 422
1 ... 422 423 424 ... 490

Comments to this Manuals

No comments