Cisco SCE 1000 2xGBE User's Guide download pdf (Page 221)

100

101

Chapter 8 Managing Subscribers

Removing Subscribers and Templates

SCE 1000 2xGBE Release 2.0.10 User Guide

OL-7117-02 8-9

• no subscriber anonymous-group name

These subscriber management commands are LineCard interface commands. Make sure that you

are in LineCard Interface command mode, (see “Entering LineCard Interface Mode,” page and

that the SCE 1000(config if)# prompt appears in the command line.

To remove a specific subscriber:

Step 1 From the SCE 1000(config if)# prompt, type no subscriber name

subscriber-name and press Enter.

The specified subscriber is removed from the system, and the SCE 1000(config)#

prompt appears.

To remove all introduced subscribers:

Step 1 From the SCE 1000(config if)# prompt, type no subscriber all and press

Enter.

All introduced subscribers are removed from the system, and the SCE 1000(config)#

prompt appears.

To remove a specific anonymous subscriber group:

Step 1 From the SCE 1000(config if)# prompt, type no subscriber anonymous-

group name group-name and press Enter.

The specified anonymous group is removed from the system, and the SCE

1000(config)# prompt appears.

To remove all anonymous subscriber groups:

Step 1 From the SCE 1000(config if)# prompt, type no subscriber anonymous-

group all and press Enter.

All anonymous groups are removed from the system, and the SCE 1000(config)#

prompt appears.

1 ... 220 221 222 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 221

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE