Cisco SCE 1000 2xGBE User's Guide download pdf (Page 144)

100

101

Chapter 5 Configuration and Management

Rebooting and Shutting Down the SCE Platform

SCE 1000 2xGBE Release 2.0.10 User Guide

5-26 OL-7117-02

To reboot your SCE 1000:

Step 1 At the SCE 1000# prompt, type reload and press Enter.

A confirmation message appears.

Step 2 Type Y to confirm the reboot request and press Enter.

EXAMPLE:

The following example shows the commands for system reboot.

SCE 1000#reload

Are you sure? y

the system is about to reboot, this will end your CLI session

Shutting Down the SCE Platform

Shutting down the SCE 1000 is required before turning the power off. This helps to ensure that

non-volatile memory devices in the SCE 1000 are properly flushed in an orderly manner.

Note

When the SCE restarts, it loads the startup configuration, so all changes made in the running

configuration will be lost. You are advised to save the running configuration before performing reload,

as described in Saving the Configuration Settings (on page 5-12).

To shut down your SCE 1000:

Step 1 Connect to the serial console port (The CON connector on the SCE 1000 front panel,

9600 baud).

The SCE 1000# prompt appears.

Step 2 Type reload shutdown.

A confirmation message appears.

Step 3 Type Y to confirm the shutdown request and press Enter.

1 ... 143 144 145 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 144

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE