Chapter 11 Maintenance
Replacing the Power Module
SCE 1000 2xGBE Release 2.0.10 User Guide
11-4 OL-7117-02
To replace a power module:
Step 1 Turn the module OFF.
Step 2 Make sure that the module power distribution is turned off
Step 3 Disconnect all power cables from the module.
Step 4 Unscrew the module and slide it out of the chassis.
Step 5 Fit the groove in the side of the new power supply module into the guide in the chassis
and gently, but firmly, slide the module into place.
Refer to the two following illustrations.
Figure 11-4: Inserting an AC Power Module
Figure 11-5: Inserting a DC Power Module
Comments to this Manuals