Cisco SCE 1000 2xGBE User's Guide download pdf (Page 135)

100

101

Chapter 5 Configuration and Management

Entering and Exiting Global Configuration Mode

SCE 1000 2xGBE Release 2.0.10 User Guide

OL-7117-02 5-17

Step 3 To enter the Global Configuration Mode, type configure and press Enter.

The SCE 1000(config)# prompt appears.

Step 4 Type enable password level 0 <password>, and press Enter.

A password is now required for all telnet access. The Network Administrator should record

passwords in a secure location.

To disable the password requirement at the User level:

Step 1 At the SCE 1000(config)# prompt, type no enable password level 0, and

press Enter.

A password is not required for telnet access to the User authorization level.

Changing Passwords

Use the enable password command to change the password. Note that if the password has

been changed, the default password will no longer be accepted.

To change the password for a specified level:

Step 1 At the SCE 1000> prompt, to access the Admin authorization level, type enable and

press Enter.

The Password: prompt appears.

Step 2 Type cisco (the default password for the Admin level) and press Enter.

The SCE 1000# prompt appears.

Step 3 To enter the Global Configuration Mode, type configure and press Enter.

The SCE 1000(config)# prompt appears.

Step 4 Type enable password level <level> <password>, and press Enter.

Use the appropriate value for the level parameter as follows:

• 0: user

• 10: admin

• 15: root

Your new password for the specified level is entered into the system.

The SCE 1000(config)# prompt appears.

Step 5 Type exit to exit the Global Configuration Mode and press Enter.

The SCE 1000# prompt appears.

1 ... 134 135 136 ... 490

Comments to this Manuals

No comments

Cisco SCE 1000 2xGBE User's Guide Page 135

Comments to this Manuals

Related products and manuals for Networking Cisco SCE 1000 2xGBE

Powiązane produkty i podręczniki dla Monitory Purdy ANDpSi121GAOS-HB-KIT